基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.     

利用时域有限差分法模拟金纳米球及球壳的光学特性

利用时域有限差分方法研究了金纳米球、金纳米球壳及多层球壳的消光特性及电场分布.结果表明:金纳米颗粒的几何参量对消光峰的位置有显著影响.随着SiO2核心半径的增大,金纳米壳的消光峰显著红移.随着金核心半径的增大,gold-silica-gold多层球壳消光谱的低能峰显著红移,而高能峰微弱蓝移.     

Biembedding Steiner Triple Systems in Surfaces Using the Bose Construction

A uniform framework is presented for biembedding Steiner triple systems obtained from the Bose construction using a cyclic group of odd order, in both orientable and nonorientable surfaces. Within this framework, in the nonorientable case, a formula is given for the number of isomorphism classes and the particular biembedding of Ducrocq and Sterboul (preprint 18pp., 1978) is identified. In the orientable case, it is shown that the biembedding of Grannell et al. (J Combin Des 6 ( 7 ), 325–336) is, up to isomorphism, the unique biembedding of its type. Automorphism groups of the biembeddings are also given.     

Spontaneous Ga incorporation in ZnO nanowires epitaxially grown on GaN substrate

Surface‐diffusion‐induced spontaneous Ga incorporation process is demonstrated in ZnO nanowires grown on GaN substrate. Crucially, contrasting distributions of Ga atoms in axial and radial directions are experimentally observed. Ga atoms uniformly distribute along the ～10 μm long ZnO nanowire and show a rapidly gradient distribution in the radial direction, which is attributed substantially to the difference between surface and volume diffusion. The understanding on the incorporation process can potentially modulate doping and properties in semiconductor nanomaterials.

     

Size-dependent resonance and buckling behavior of nanoplates with high-order surface stress effects

This work presents a theoretical study of the resonance frequency and buckling load of nanoplates with high-order surface stress model. A classical thin plate theory based on Kirchhoff–Love assumption is implemented with surface effects. Circular and rectangular nanoplates with simply supported end conditions are exemplified. The size-dependent solutions are compared with the simplified solutions based on simple surface stress model, and also on the classical theory of elasticity. We aim to explore the scope of applicability so that the modified continuum mechanics model could serve as a refined approach in the prediction of mechanical behavior of nanoplates.     

MHD squeezed flow of water functionalized metallic nanoparticles over a sensor surface

Present study is devoted to analyze the magnetohydrodynamics (MHD) squeezed flow of nanofluid over a sensor surface. Modeling of the problem is based on the geometry and the interaction of three different kinds of metallic nanoparticles namely: copper (Cu), alumina (Al₂O₃) and titanium dioxide (TiO₂) with the homogeneous mixture of base fluid (water). The self-similar numerical solutions are presented for the reduced form of the system of coupled ordinary differential equations. The effects of nanoparticles volume friction, permeable velocity and squeezing parameter for the flow and heat transfer within the boundary layer are presented through graphs. Comparison among the solvent are constructed for both skin friction and Nusselt number. Flow behavior of the working nanofluid according to the present geometry has analyzed through Stream lines. Conclusion is drawn on the basis of entire investigation and it is found that in squeezing flow phenomena Cu–water gives the better heat transfer performance as compare with the rest of mixtures.     

丁胺包裹的CdSe量子点敏化的TiO2纳米晶薄膜电子转移机制

利用超快光谱技术系统研究了在丁胺包裹的CdSe量子点敏化的TiO₂纳米晶薄膜起始时刻界面间电子转移动力学。与之前的报道不同,该实验结果表明:CdSe量子点经过表面修饰后,两相电子注入机制--热电子和冷电子注入得以被证实,即:电子能分别从CdSe量子点导带中高的振动能级和导带底转移到TiO₂的导带。该机制详细描绘了电子在纳米界面间转移的图景。进一步研究发现:热电子注入的电子耦合强度(3.6±0.1 meV)比弛豫后的基态电子注入高两个数量级,基于Marcus理论,伴随着0.083 eV的重组能,冷电子注入的耦合强度值为~50 μeV。     

使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

Development of Surface Nano-Crystallization in Alloys by Surface Mechanical Attrition Treatment (SMAT)

Nanometer-sized grain structures that exhibit a large number of grain boundaries on the surface of a bulk material demonstrate excellent properties relative to their coarse-grained (CG) equivalents. Surface modification using surface mechanical attrition treatment (SMAT) is an option that cab be used to tailor the corrosion, tribological, mechanical, and chemical reaction properties of a surface. SMAT is an effective route to create the nanostructured surface layer. The SMAT process has unique advantages compared with the other coating and deposition techniques for surface nanocrystallization. For example, SMAT does not alter the chemical composition of the nanocrystalline surface layer in the matrix. In addition, SMAT has been demonstrated to activate the material surface layer by surface modification and enhance the atomic diffusivity. This article presents a review of the advantages offered by the SMAT technique for the creation of high performance surface layers. The influence of the created nanocrystalline layer on mechanical, physical, and chemical properties is assessed. Developments and the current status of the surface nanolayer that are formed are evaluated from a physical approach. Finally, prospects for the future development of grain refinement on the surface of a material matrix and potential applications are presented.